Ships Across Canada and the U.S.
In Canada, wood is used for everything like exterior siding, timber frames and outdoor decks. But the climate is harsh. There are constant freeze-thaw cycles, intense sun, rain, and snow can break down inferior stains fast. That means peeling, fading, and costly reapplications.
Good wood stains aren’t just there for the looks, but they also protect. It locks out moisture, resists UV damage, and helps your wood last longer. But not all stains are made with Canadian conditions in mind. That’s why more professionals and homeowners are turning to CBR Products.
Wood stain protects and improves the wood surfaces by going into the grain and adding colour. But it’s not just about aesthetics. In Canada, wood stains need to stand up to UV rays, freezing temperatures, humidity, and moisture. Canadian wood projects need to have stains that won’t peel, crack, or fade after one season. That’s why choosing the right stain matters.
CBR Products specializes in wood stains made specifically for Canada’s Climate. Their stains are designed to last longer, look better, and protect deeper.
CBR stains are built to handle Canada’s changing weather. Snow, sun, rain, and rapid freeze-thaw cycles break down lesser-quality finishes fast. CBR’s Broda line uses flexible, breathable coatings that expand and contract with the wood, keeping the finish intact for longer.
CBR stains penetrate deep into the grain instead of sitting on the surface. This helps avoid peeling and gives wood a more natural look. The finish enhances the grain and protects it from within. This kind of longevity means fewer reapplications and better long-term value.
Every CBR product is made with environmental impact in mind. The wood stains are water-based, low-VOC, and free of harsh solvents. This makes them safe for both interior and exterior use and is also easier to clean up. For homeowners and professionals who care about sustainability, CBR checks all the boxes.
CBR stains are used on log homes, timber frames, decks, fences, and many other heritage buildings across Canada. Builders choose CBR not just for its product quality, but because they can depend on consistent performance across every project type.
You’re not left guessing which product to use. CBR’s technical team offers real advice based on your project’s wood type, exposure level, and aesthetic goals. They also offer custom tinting options and follow-up support to make sure you get the result you want.
Related: List of Best Wood Stains to Buy With Lifespan
CBR Products offers a full range of wood stains built for different types of projects, like timber frames or cabinets. Each formula is designed to penetrate deep, enhance the natural grain, and hold up in Canadian conditions.
1. Broda Clarity:
A waterborne, crystal-clear finish that protects the wood from UV damage without changing its color. Perfect when you want to save the raw, natural look of wood while still adding a protective layer.
2. Broda Stain & Seal:
A penetrating oil-modified water-based stain that gives you color and protection in one step. It’s best for exterior wood like siding, fences, and decks where strength and easy maintenance matter.
3. Broda Pro-Thane:
A tough, clear coating made for high-wear surfaces like wood floors, cabinetry, and trim. It’s smooth, long-lasting, and simple to recoat when the time comes.
These stains are trusted across Canada for one reason: they perform. Built for the weather, easy to work with, and backed by real technical support, CBR stains are made to last.
Getting the right wood stain depends on a few practical details:
Where are you putting the wood?
If it is outdoor, then it needs to have protection from UV, rain, and seasonal shifts. Indoor wood needs a clean, strong finish that holds up to daily use.
Do you want to keep the natural look or add colour?
Some stains bring out the grain and texture, while others give a richer, more uniform colour.
What type of wood are you working with?
Every species absorbs stains a little differently. Cedar, fir, pine, and hardwoods all react in their own way.
How exposed is the surface?
Sun, moisture, and freeze-thaw cycles all affect which product will last longer and stay looking good.
Do you want something more environmentally friendly?
Water-based, low-VOC options are ideal for indoor use and better for air quality.
CBR helps match the right product to your project. If you’re working on a siding, a deck, structural beams, or furniture, their team will point you to the right stain and make sure you know how to apply it for the best results.
CBR wood stains can be used anywhere, including the damp climate of coastal B.C, the dry interior of Alberta and across the harsh seasonal shifts of the Prairies. Builders, architects, and homeowners turn to CBR because the products hold up across different regions and projects.
Log home builders depend on Broda stains for their long-term fade resistance. Timber frame designers choose them for the natural, low-sheen finish. You will easily find CBR stains on cabins, farm buildings, ski chalets, custom homes, and commercial spaces, wherever wood needs to last and look good doing it.
Contractors and builders who work with wood every day choose products they know will perform the best. CBR has built its reputation for delivering good quality and real technical support. Our stains are easy to apply, strong, and designed for Canadian conditions, so professionals know they won’t be running into issues mid-project.
Along with the products, our team is known for being helpful, knowledgeable, and responsive. That support makes a difference when timelines are tight or when a project has specific performance or appearance goals.
Wood projects in Canada need more than a surface coat. Between the sun, snow, and shifting temperatures, finishes break down fast if they’re not made for it. CBR stains are built to last in these conditions.
The products are water-based, low-VOC, and easy to apply. More importantly, they do the job. People use them on decks, siding, beams, and floors across the country, and they keep coming back because the results hold up.
If you need help choosing the right stain, our team can walk you through it. You can also check out their full product line online.
In Canada, the best wood stains are those that can handle extreme temperature shifts, moisture, and UV exposure. Look for water-based, breathable stains that penetrate deep into the wood and resist peeling or cracking.
Yes, high-quality water-based stains are great for exteriors. They offer strong protection against moisture and sun damage, dry faster, and are more environmentally friendly than solvent-based options.
Consider where the wood is located (indoor or outdoor), how much sun and moisture it gets, the type of wood you’re using, and whether you want to highlight the natural grain or add color. These factors will help determine the right stain formula and finish.
We aim to manufacture premium, hi-performance wood coatings in controlled, quality batches using the finest ingredients and science-backed formulas.
Designed & SEO by Team Nerds Digital