Painters, builders, architects and dealers get a phone number that reaches someone who has actually used the product, and the paperwork you need to specify it and support the job through inspection.
You do not all need the same thing from us, so start with the one that sounds like you.
Coverage rates vary significantly between smooth and rough-sawn wood, and the recoat windows are not the same across the three lines. Get the numbers before you quote the job, not after.
Work out quantities →Our sheets ask for 5 °C to 25 °C and around 50% relative humidity. If your window is tight or the elevation is large, pre-finished cladding means you are not waiting on the weather.
Architectural wood →VOC content, coating type, substrates and maintenance intervals, plus ready-to-edit specification wording for MasterFormat Section 09 93 00, Staining and Transparent Finishing.
Spec language →We are selective about where BRODA sits on a shelf, because it needs someone behind the counter who can answer a question about it. Tell us about your store and your market.
Enquire about dealership →Substrate, prep, previous coating, application, recoat timing. If you send a photo we will tell you what we would do with it.
1-877-671-1405Current technical data sheets and safety data sheets for every product, side by side in one table.
Open technical →Pint samples, $10 each. Species and mill finish change the colour more than most people expect, so test on the actual boards.
Order samples →Coverage worked out per coat for decks, siding, fences and concrete, in metric or imperial, with the rough-sawn allowance built in.
Open calculator →Cladding, panelling and soffits factory finished before delivery through our sister company Crisp Wood Co, so the finish is applied under controlled conditions rather than on site.
Architectural wood →Set up an account with us for project and repeat orders.
Call or text 604-254-3325Written to be edited. Replace the product, colour and sheen with the ones you have chosen, and confirm the current data sheet before you issue.
EXTERIOR WOOD COATING MANUFACTURER CBR Products Ltd., Port Coquitlam, British Columbia, Canada. Telephone 1-877-671-1405. Product line: BRODA. PRODUCT BRODA [Protektor SLT / Protektor DR / Clarity], colour [__], sheen [__], as manufactured by CBR Products Ltd. Substitutions to be approved in writing prior to bid close. SUBSTRATE PREPARATION Wood to be clean, dry and free of mill glaze, dirt, and any previous coating not compatible with the specified product. Moisture content within the range stated on the current product data sheet at the time of application. APPLICATION Apply in accordance with the manufacturer's current data sheet. Ambient and substrate temperature 5 C to 25 C, relative humidity approximately 50%. Do not apply if precipitation or temperatures below the stated minimum are expected within the recoat window. Number of coats and recoat interval as stated on the data sheet for the specified product and substrate. END GRAIN AND CUT ENDS All cut ends, notches and drilled penetrations to receive the specified end-grain treatment before installation. MOCK-UP Provide a sample panel of the specified species, mill finish and coating system for review and approval before general application. Approved panel to remain on site as the standard of finish. MAINTENANCE Maintenance interval to be confirmed against the current product data sheet for the applicable exposure.
Sheens, coat counts and maintenance intervals differ between the three lines, so fill them in for the product you choose. Each product’s figures are on the technical page.
Species, whether it is smooth or rough sawn, new or weathered, and what is on it now. That decides most of the rest.
Pints at $10. Coat an offcut from the actual delivery, not a chip card, and look at it dry and outside.
Run the take-off through the calculator per coat, then add for railings.
Larger orders and colours outside the standard range are worth a phone call before you place them.
Photos of the substrate, the elevation area, and your timeline are enough for us to give you a schedule and a quantity.
Made in Port Coquitlam, British Columbia. Shipping across Canada and into the United States.